Social Icons

Featured Posts

Friday, December 28, 2012

SA-10 D2 - Sundown Audio 10" Dual 2-Ohm SA Series Subwoofer


Product Description
* Sundown Audio SA-10 10" Subwoofer * Dual 2 Ohm Voice Coils * Tinsel Leads Secured to Spider * Strong Adhesives and Materials * 600 Watt RMS Power Handling

* FS : 31.6 Hz * Qts : 0.45 * Qes : 0.49 * Qms : 5.64 * VAS : 21.9 L * Mms : 187.4 g * Mounting depth = 6" * Cut out: 9 3/16" * OD with gasket: 10 3/8" * XMAX: 19mm one wayEnclosure Suggestions:VENTED : * 1.25 - 1.5 cubic feet tuned to 30 - 35 Hz * Yields F3 in the mid to high 20sSEALED : * 0.55 cubes for 0.707 Qtc alignment * Yields F3 of 50 Hz

What make this SA-10 D2 - Sundown Audio 10" Dual 2-Ohm SA Series Subwoofer worn out ? This product has feature like below


Features
  • 10" 600W SA Series Subwoofer
  • Dual 2-Ohm
  • 600 watts RMS
  • RE: 4.33 Ohms
  • Fs: 30.3 Hz
Price :

Thursday, December 27, 2012

Obcon Single 18" Slot Vented Pro Built FREAK Series


Product Description
The ultimate in competition series enclosures. Built and designed by professionals to crush anything in its path! With 3/4" Plexiglass, 1" MDF, V-Block sound deadening spray, brushed aluminum side panels, this box is the FREAK of nature your looking for. DOES NOT WORK FOR JL W7 SPEAKERS. (Same box is available for JL W7 speakers in a separate listing

What make this Obcon Single 18" Slot Vented Pro Built FREAK Series worn out ? This product has feature like below


Features
  • Labyrinth slot vent design
  • 23" H x 28.5" W x 29" D
  • 3/4" Plexiglas
  • 1" MDF with brushed aluminum side panels
  • Does not work for JL W7 speakers (available in a separate listing)
Price : $699.95

Pyle Vehicle Amp and Bass Box Enclosure System Package for your Car, Van, Truck, Mobile, Concert, Stage, Performance, Bar, etc. - PLA1200 1900 Watts Mono Block Mosfet Power Amplifier - PL110SS Single 10'' Slim Designed Subwoofer Bass Box Enclosure System


Product Description
Pyle vehicle audio system for your car, van, truck, mobile, etc. With the most powerful 1900 watt mosfet amplifier and the 1200 watt bass box enclosure system you should be ready to rock and boom. Product Dimensions: PLA1200 - 10.63''W x 1.42''H x 12''L; PL110SS - 19''W x 13''H x 1.2''D

What make this Pyle Vehicle Amp and Bass Box Enclosure System Package for your Car, Van, Truck, Mobile, Concert, Stage, Performance, Bar, etc. - PLA1200 1900 Watts Mono Block Mosfet Power Amplifier - PL110SS Single 10'' Slim Designed Subwoofer Bass Box Enclosure System worn out ? This product has feature like below


Features
  • PLA1200 - RMS Power @ 4 Ohms: 200 W; RMS Power @ 2 Ohms: 350 W; RMS Power @ 1.3 Ohms: 600 W
  • Variable Low Electronic Crossover Network; Variable Input Level (Gain) Control; Variable Bass Boost
  • 2 Ohm Stable; Sub Sonic Filter; Thermal / Overload / Short Circuit Protection
  • RCA Inputs And Outputs; Low Level Inputs; Phase Control 0-180 degree
  • PL110SS - Black Flame PP Cone with Foam Edge; 2.0'' Aluminum Voice Coil; Rear Vented Design; 1200 Watts MAX Power Handling
Price : $199.99

Pioneer TS-W3002D4 12 In. Champion Series PRO Subwoofer with 3500 Watts


Amazon.com Product Description
~Pioneer's TS-W3002D4 subwoofers are designed to produce powerful bass. Just take a look at the super-heavy-duty construction, designed to handle up to 3,500 watts max. Double-stacked magnets deliver higher power, and a step-up radial surround offers superior control and long excursions. Pioneer used a constructed cast-aluminum basket for this sub--add in a patented IMPP cone and you've got a monster sub that can handle whatever you want to throw at it.

Pioneer Champion Series PRO Subwoofers

Powerful by Design
Champion Series PRO subwoofers deliver incredible musicality heightened by booming bass--all in a versatile, compact design. Inspired by Pioneer's strong SPL heritage, Champion PRO subwoofers deliver a remarkably powerful, accurate, and clear low-end that will transform your in-car audio experience.

Air Suspension System
Boasting big bass power, the patented air suspension technology of the Champion Series PRO subwoofer makes it a hard-hitting performer. The innovative architecture of the chamber creates a spring-like effect that compresses air, enabling the speaker to fit a 10-inch enclosure while delivering 12-inch bass sound.

Stealthy Installation
Masterfully engineered to deliver maximum sound in a minimal enclosure space, the Champion Series PRO subwoofer is designed to fit a variety of spaces. From under the front seats and behind the back seats, to inside doors and under the dash, your install can be customized to fit your needs.

Built to Last
The Champion Series PRO subwoofer combines innovative technology with top quality materials to consistently deliver superior performance. This subwoofer houses a three-layer, wide-roll, fiber-woven radial surround that provides phenomenal power handling with minimal distortion. The enduring strength of this subwoofer comes from its aluminum die-cast chassis, double stacked magnets, patented air suspension system, and rigid lightweight IMPP cone.
TS-W3002D4 Features

Air Suspension System
For its revolutionary 3.25 inch deep Shallow Subwoofer, Pioneer created an Air Suspension system effective within a 70% smaller-than-previous enclosure that locks air for a spring-like effect between main and drive cones moving in unison. The result is consistently clear, powerful, wide-ranging bass response. The subwoofer's dual cone structure maintains better sound linearity and reliability after hours of hard use than conventional subwoofers with "spider" structures to keep the voice coil aligned. This incredible technology is applied to this new generation of high output, high performance subwoofers.

Double-Stack Magnet with Double-Stack Top Plate
To produce the tremendous magnetic energy we envisioned for this sub, we employed double-stacked magnets, weighing a hefty 110oz, and a double-stacked top plate above them. This design ensures positive, powerful control of the voice coil during those long excursions--and it's one reason you can ring up those high SPL numbers.

Wide-Roll 3-Layer Fiber Radial Surround
A sub's surround plays a key role in a speaker's performance. In order for bass response to be clear and tight, the surround has to respond evenly around its entire circumference without flexing or puckering, even at high volume levels. That's why Pioneer created a surround consisting of two layers

What make this Pioneer TS-W3002D4 12 In. Champion Series PRO Subwoofer with 3500 Watts worn out ? This product has feature like below


Features
  • 12-inch Champion Series PRO subwoofer with 3500 Watts maximum (1000 nominal) power handling
  • Basalt/carbon fiber reinforced IMPP cone with fiber-woven aramid surround
  • Dual 4-ohm voice coil for 2 or 8 ohm operation
  • 20 Hz to 150 Hz frequency response with 90 dB sensitivity
  • 188.8 Millimeter mounting depth
Price : $250.00

Clarion EQS746 1/2 DIN Graphic Equalizer with Built-in Crossover


Product Description
7-Band Graphic Equalizer 6-Channel / 7 Volt RCA Outputs (Front/Rear/Subwoofer) Adjustable Master Volume Level Control Adjustable Subwoofer Level Control 2-Channel RCA AUX Input with Adjustable Gain Selectable 12dB Low-Pass Crossover (60Hz or 90Hz) Gold Plated Terminals Dimensions:7"(W) 1"(H) 4"(D)

What make this Clarion EQS746 1/2 DIN Graphic Equalizer with Built-in Crossover worn out ? This product has feature like below


Features
  • 7-Band Graphic Equalizer 6-Channel / 7 Volt RCA Outputs (Front/Rear/Subwoofer)
  • Adjustable Master Volume Level Control Adjustable Subwoofer Level Control
  • 2-Channel RCA AUX Input with Adjustable Gain Selectable 12dB Low-Pass Crossover (60Hz or 90Hz)
  • Gold Plated Terminals Dimensions:7"(W) 1"(H) 4"(D)
  • This unit is exclusively for vehicles with a negative ground, 12V battery system.
Price : $149.99

Wednesday, December 26, 2012

Boss PH2500M Phantom 2500 Watt Mosfet Monoblock Amplifier with Remote


Amazon.com Product Description
New for 2010, Boss Audio's Phantom power amplifiers cover a wide variety of applications. Four- and two-channel full-range models will match perfectly with your speaker system. MOSFET amplifiers deliver plenty of power, while bass boost and built-in high- and low-pass crossovers allow you to customize your cabin acoustics to your taste. For the ultimate in power, Boss offers monoblock amplifiers like the PH2500M.

A MOSFET monoblock amp with 2500 watts peak power. Click to enlarge.



Phantom amps include a remote subwoofer level control.

Remote Subwoofer Level Control
Onyx amps include a remote subwoofer level control for easy level adjustments.

Line/Speaker Level Inputs
Separate line and speaker level inputs mean the amplifier can handle high-level signals from receivers lacking RCA outputs.

Variable Low-Pass Crossover
Keep high frequencies from your sub with a variable crossover.

Variable Gain Control
Allows you to match the input gain to your receiver for better sound with less distortion.

MOSFET Power Supply
For high performance with low heat.

Bass Boost
Add a little extra low-end power with 0 to +18dB of variable bass boost.

Power and Protection LEDs
Protection LEDs let you know when there's a problem.

What's in the Box
Boss PH2500M Amplifier, Subwoofer Level Control, User's Manual

What make this Boss PH2500M Phantom 2500 Watt Mosfet Monoblock Amplifier with Remote worn out ? This product has feature like below


Features
  • Monoblock Phantom amplifier with MOSFET power supply
  • Delivers 2500 Watts at 2 ohms; 1400 Watts at 4 ohms
  • Line and speaker level inputs with variable gain control
  • Low-pass variable crossover; 18dB bass boost
  • Includes remote sub control
Price : $259.00

Rockford Fosgate Punch P3 Shallow 12-Inch 400-Watt Subwoofer


Amazon.com Product Description
The Rockford Fosgate P3 12-inch Shallow Mount subwoofer delivers the Punch--even in depth-limited mounting situations. All vehicles are not the same: some can accommodate deep subwoofers and some can't. In the past that meant no Bass. Not anymore! Now even depth challenged vehicles can have REAL Bass and the Dual Voice Coil allows configurations for every application. Shallow woofers are designed for challenging spaces when a traditional woofer cannot be used.

Rockford Fosgate Punch Series Subs Featuring innovative parabolic cone designs, oversized surrounds and large motor assemblies, Punch subwoofers deliver deep, loud, aggressive bass--not to mention stunning cosmetics that you'll want to show off. For over 20 years, Punch subwoofers have shown the world that big bass, extended power handling and awesome cosmetics need not cost a fortune. One listen and you'll know why it's called The PUNCH.


Designed for challenging spaces when a traditional woofer cannot be used. Click to enlarge.

Anodized aluminum voice coil formers provide excellent heat dissipation. Click to enlarge. P3SD412 Features

Speaker Construction
Custom 10-AWG nickel plated push terminals Extended pole piece and bumped backplate High excursion Poly-Ether-Ester surround High-temp voice coil with spun-laced Nomex reinforcement collar Kevlar Fiber reinforced semi-pressed paper cone and ABS/Acrylic dustcap Protective PVC textured magnet cover Reversible diamond cut cast aluminum trim ring Rigid die-cast aluminum low profile basket Vented spider cavity

Aluminum V/C Former
Rockford Fosgate subwoofers use anodized aluminum voice coil formers that provide excellent heat dissipation. Unlike traditional plastic substitutions, aluminum acts like a heat-sink to quickly dissipate thermal build-up on the voice coil. This keeps subwoofers cool during high SPL conditions.

CEA-2031
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has the capacity to handle power under continuous damand, not instantaneous power handling, that over time, can damage voice coils.

Reversible Mounting
Rockford Fosgate subwoofers can be mounted in either direction. A removable trim ring can be installed on the back or front side of the subwoofer frame. This gives the subwoofer a finished look regardless of mounting configuration.

Stitched Tinsel Leads
Multipoint "periodic" stitched lead wire technique reduces the mass of each tinsel lead and spreads stress and strain over a greater area, significantly improving the reliability and performance of the subwoofer.

These stitched tinsel leads withstand extreme duty cycles, fatigue and high current that is critical to robust design.

Spherically Vented Motor
Optimizing the voice coil temperature is one of the most critical

What make this Rockford Fosgate Punch P3 Shallow 12-Inch 400-Watt Subwoofer worn out ? This product has feature like below


Features
  • Shallow-mount 12-inch, 4-ohm, dual voice coil subwoofer with 600 watts maximum power handling (300 watts RMS)
  • Kevlar fiber reinforced semi-pressed paper cone with high-excursion Poly-Ether-Ester surround
  • High-temp voice coil with spun-laced Nomex re-inforcement collar
  • Mount in either direction; reversible cast aluminum trim ring included
  • Rigid die-cast aluminum low profile basket
Price : $269.99